Jump to How To
Create your own Beetlejuice-inspired “Bob” shrunken head costume with this fun DIY! Perfect for Halloween, it’s easy to make and sure to turn heads!
Every year my kids challenge me to create unique DIY costumes and this year was no exception! In the past we’ve made a Plague Doctor, Functioning Demogorgon Mask, Beeker Costume, and a whole family of Angry Bird Costumes!
Too busy to make this right away? Pin it for later! Pin this post to your favorite board on Pinterest and it will be there when you’re ready!
TABLE OF CONTENTS
When planning for Halloween we love to binge watch our favorite, cult classic spooky movies. Beetlejuice is, of course, at the top of the list!
Hocus Pocus is a close second though – you should check out my hocus pocus dessert board, zombie pretzels and Sanderson sisters rice krispies!
We’ve made an entire DIY Family Beetlejuice Costume, Beetlejuice Sandworm Costume and epic Barbara and Adam Maitland costumes! These were probably our favorite costumes to date!
Who is Bob?!
When Beetlejuice 2 came out in theatres this year – we went to the movie on opening night! And you guys, it was SO GOOD!!
Our favorite character was, of course, “Bob” the shrunken head guy. Bob is a shrinker, a man with a shrunken head who works with Betelgeuse in the afterlife.
There are actually many shrinkers working for Beetlejuice in the new movie! Making this a costume, that would be fun to make as an individual or for a group.
I have detailed every step of how to create this epic Bob, the shrunken head guy costume. It’s easy to create with the step-by-step tutorial, promise!
If you scroll to the bottom of this blog post I even have a free printable for the “Hello, my name is Bob” name tag! Simply enter your email in the form below and I’ll send it to you.
Beetlejuice coles notes
- Beetlejuice is a 1988 dark comedy directed by Tim Burton and produced by Warner Bros.
- The Maitlands are a married couple that suddenly pass away and are trapped in their house.
- A new family moves in and the couple tries desperately to scare them off.
- They transform themselves with these scary faces but still have no luck.
- Finally, they enlist in the aide of a poltergeist named Betelgeuse, played by Michael Keaton.
- Drama ensues, “Beetlejuice” is banished and the Maitlands and family decide to live together peacefully.
This post contains affiliate links.
Shrunken Head Beetlejuice Costume
- Small skull form (4-6″ big)
- Small black wig
- Scissors
- Air dry clay
- Clay shaping tool
- 1″ Styrofoam balls
- Acrylic paint
- Paintbrush
- Mod podge
- Two PVC poles about 3′ and 2′ in length
- Two large sponges or foam blocks
- Extra large white dress shirt
- White ball cap
- Extra large yellow suit – get a suit that is two times the size of the person wearing it. My son is a mens size medium.
- Blue and yellow striped tie
- Hot glue gun
- Hot glue
- Hello name tag printable **free printable below
I found most of the craft supplies at our local Dollarama store but have linked similar materials on Amazon.
I have included photos along the way but if you have any questions at all be sure to drop me a message.
DIY Shrunken Head Costume
1. Start with a small skull base – this will become the shrunken head!
2. Cover the skull in strips of masking tape to smooth out some of the features.
3. Use air dry clay to shape the features of the head.
4. Make the eyebrows larger, the nose more pronounced, add forehead rolls and holes around the mouth. Use a clay shaping tool to score lines into the face and allow to dry completely.
Tip: use your fingers and a bit of water to help spread the clay thinly over the skull. This will help to prevent too much build up and the head becoming overly heavy.
5. Paint the head with a variety of tones of brown acrylic paint, from light on the nose to dark in the eye sockets. *
* I originally painted our shrunken head brown to go with our Family Beetlejuice Costume and later washed over the brown paint with turquoise to use for this “Bob” costume.
6. Next gather supplies to assemble the head.
7. Cut a swath of black hair about 10 inches long and tie it in the center to form a pony tail. Glue this to the top of the head with hot glue.
8. Trim off about 1/3 of the styrofoam from the back of two styrofoam balls and glue them into the eye sockets.
9. Cut nine piece of twine 1.5 ” long and glue to the mouth in a criss cross manner.
Finish the eyeballs
10. Paint small pupils and veins onto the eyes using acrylic paint.
11. Glue the head to the top of the hat. Tip: a white hat will help to blend with the white dress shirt.
12. Now create large shoulders to fit into the xl shirt. We used two pieces of pipe connected with a “t” and two large yoga blocks to create shoulders. You could also use pool noodles and large sponges.
13. Next, glue the collar of the white shirt around the base of the shrunken head and loop the tie around the neck.
14. Move on to the yellow suit. Here you will need to cut a hole on each side of the suit jacket about half way down the side wide enough to fit an arm through. Then cut a corresponding slit in each arm of the suit at about the elbow.
This is where the arms will go through the costume from inside the suit jacket to the arms of the jacket. You can sew or hot glue gun these holes together to make a seamless transition if you want but we found that it was not needed.
15. Cut down the two side seams of the white dress shirt – the wearer will not be placing their arms through the dress shirt, only the suit.
15. To assemble the shrunken head costume, start by strapping the shoulder apparatus to the wearer at the chest level. This can be done with a belt or tape.
16. Have the wearer put the suit pants on and pull them up as high as they will go. Now place the white shirt and shrunken head hat on the wearer – over the shoulders and button up the dress shirt.
17. Next, place the suit jacket over the dress shirt, have the wearer move their arms through the holes, tuck everything in and button up the suit jacket.
18. Add the “Hello, my name is Bob” name tag and you are done!
DIY Bob the Shrunken Head Costume
Fun right?! Luckily we snuck in this photo shoot at the park just before it started to rain!
The white dress shirt is see through, allowing the wearer to see where they are going. But, they could also unbutton the shirt if visibility is reduced – which often happens if it starts to get dark out!
I hope that you love this Beetlejuice shrunken head costume as much as we do. Be sure to grab the free printable name tag below!
Free “Bob” Name Tag Printable
Enter your name and email below to get an instant download of the files! You are then registered for my weekly email Newsletter that is full of fun recipes, easy crafts and free printables.
File usage
- All digital files on Homemade Heather are for personal use only.
- Please direct others to the original website link when sharing.
- Digital reselling, resharing or distribution is prohibited and NOT allowed.
If you love this DIY Beetlejuice Shrunken Head Costume, please help me by sharing it on Facebook or Pinterest so that others can enjoy it too!
5 from 3 votes
DIY Beetlejuice Shrunken Head “Bob” Costume
Prep Time2 hours hrs
Active Time1 hour hr
Yield: 0
Author: Heather Painchaud
Materials
- Small skull form 4-6″ big
- Small black wig
- Scissors
- Air dry clay
- Clay shaping tool
- 1 ” Styrofoam balls
- Acrylic paint
- Paintbrush
- Mod podge
- Two PVC poles about 3′ and 2′ in length
- Two large sponges or foam blocks
- Extra large white dress shirt
- White ball cap
- Extra large yellow suit
- Blue and yellow striped tie
- Hot glue gun
- Hot glue
- Hello name tag printable
Instructions
Start with a small skull base – this will become the shrunken head!
Cover the skull in strips of masking tape to smooth out some of the features.
Use air dry clay to shape the features of the head.
Make the eyebrows larger, the nose more pronounced, add forehead rolls and holes around the mouth. Use a clay shaping tool to score lines into the face and allow to dry completely.
Paint the head with a variety of tones of brown acrylic paint, from light on the nose to dark in the eye sockets. *
* I originally painted our shrunken head brown to go with our Family Beetlejuice Costume and later washed over the brown paint with turquoise to use for this “Bob” costume.
Next gather supplies to assemble the head.
Cut a swath of black hair about 10 inches long and tie it in the center to form a pony tail. Glue this to the top of the head with hot glue.
Trim off about 1/3 of the styrofoam from the back of two styrofoam balls and glue them into the eye sockets.
Cut nine piece of twine 1.5 ” long and glue to the mouth in a criss cross manner.
Finish the eyeballs
Paint small pupils and veins onto the eyes using acrylic paint.
Glue the head to the top of the hat. Tip: a white hat will help to blend with the white dress shirt.
Now create large shoulders to fit into the xl shirt. We used two pieces of pipe connected with a “t” and two large yoga blocks to create shoulders. You could also use pool noodles and large sponges.
Next, glue the collar of the white shirt around the base of the shrunken head and loop the tie around the neck.
Move on to the yellow suit. Here you will need to cut a hole on each side of the suit jacket about half way down the side wide enough to fit an arm through. Then cut a corresponding slit in each arm of the suit at about the elbow.
This is where the arms will go through the costume from inside the suit jacket to the arms of the jacket. You can sew or hot glue gun these holes together to make a seamless transition if you want but we found that it was not needed.
Cut down the two side seams of the white dress shirt – the wearer will not be placing their arms through the dress shirt, only the suit.
To assemble the shrunken head costume, start by strapping the shoulder apparatus to the wearer at the chest level. This can be done with a belt or tape.
Have the wearer put the suit pants on and pull them up as high as they will go. Now place the white shirt and shrunken head hat on the wearer – over the shoulders and button up the dress shirt.
Next, place the suit jacket over the dress shirt, have the wearer move their arms through the holes, tuck everything in and button up the suit jacket.
Add the “Hello, my name is Bob” name tag and you are done!
Video
1
Plants vs Zombies Costume – Cone Head Zombie
Check out this recipe
2
Mario and Luigi Go Kart Costumes Halloween Blog Hop
Check out this recipe
3
Beeker Muppet Costume Tutorial
Check out this recipe
4
ANGRY BIRDS ~ Costume Tutorial and Patterns
Check out this recipe
5
Stranger Things Functioning Demogorgon Mask DIY
Check out this recipe
Hello, I’m Heather!
I'm an active mom of twin boys who is always looking for opportunities to inspire creativity through fun crafts, do-it-yourself projects and delicious recipes. This blog has been an integral part of supporting my little family and I am so grateful to have you become a part of our journey! Let's create together... Read more...